東莞理工學院研究生導師名單

東莞理工學院機械工程學院：朱艷

2018.07-- 東莞理工學院  講師
1. Yan Zhu, Laifei Cheng, Baisheng Ma, et al. Calculation and synthesis of ZrC by CVD from ZrCl4-C3H6-H2-Ar system with high H2 percentage. Applied Surface Science, 332 (2015) 591-598. (SCI 1區Top期刊，IF:3.387).
2. Yan Zhu, Laifei Cheng, Mingxing Li, et al. The synthesis and characterization of CVD ZrB2 coating from ZrCl4-BCl3-H2-Ar system. Ceramics International, 44 (2018) 2002-2010. (SCI 1區，IF: 2.986).
3. Yan Zhu, Laifei Cheng, Baisheng Ma, et al. Effect of CVD ZrB2 coating thickness on anti-ablation performance of C/SiC composites. Ceramics International, 44 (2018) 8166-8175. (SCI 1區，IF: 2.986).
4. Yan Zhu, Laifei Cheng, Baisheng Ma, et al. New route to synthesize ZrB2 coatings by reactive chemical vapor deposition method using Zr-BCl3-H2-Ar reagents. Surface and Coatings Technology, 337 (2018) 209-216. (SCI 1區Top期刊，IF:2.589).
5. Yan Zhu, Laifei Cheng, Baisheng Ma, et al. Thermodynamic analysis on the codeposition of ZrC-SiC by chemical vapor deposition using the ZrCl4-C3H6-MTS-H2-Ar system. Ceramics International, 40 (2014) 6427-6433. (SCI 1區，IF: 2.986).

東莞理工學院機械工程學院：陳磊

2018.1至今 東莞理工學院  教師
2015.12-2017.12 復旦大學-南方科技大學 博士后
2015.4-2015.11 南方科技大學 Research Fellow
[1] Lei Chen, Dazhi Sun, Jin Li, etc.. Exfoliation of layered zirconium phosphate nanoplatelets by melt compounding. Materials and Design. 2017, 122: 247-254.
[2] He Zhang, Lei Chen, Xiao Han, et al.. Enhanced mechanical properties of Nylon6 nanocomposites containing pristine α-zirconium phosphate nanoplatelets of various sized by melt-compounding. RSC Advances. 2017, 7: 32682.
[3] Fan Lei, Junlong Yang, Bingyu Wu, Lei Chen, Dazhi Sun. Facile design and fabrication of highly transparent and hydrophobic coatings on glass with anti-scratch property via surface dewetting. Progress in Organic Coating. 2018, 120: 28-35
[4] Haoyang Sun, Feng Jiang, Fan Lei, Lei Chen, Dazhi Sun. Graphite fluoride reinforced PA6 composites: crystallization and mechanical properties. Materials Today Communication. 2018, 16: 217-225
[5] L Chen, S Kirchberg, B Y Jiang, etc.. Fabrication of long focal length plano-convex microlens array by combining micro milling and injection molding process. Applied Optics. 2014, 53(31): 7369-7380
[6] Chen Lei, Stefan Kirchberg, Jiang Bingyan, etc.. Replication, characterization and simulation of micro injection molded microlens arrays using technical amorphous polymers. Key Engineering Materials 2013, (562-565): 458-464
[7] S. Kirchberg, C. Lei, L. Xie, G. Ziegmann,et al.Replication of precise polymeric microlens array combining diamond turning and micro injection molding. Microsystem Technologies. 2012, 18(4): 459-465
[8] 國內發明：孫大陟，陳磊，一種層狀納米顆粒、剝離方法及應用，中國發明專利（已授權），專利號：201610128428.3

東莞理工學院機械工程學院：王珂瑋

2017.12-- 東莞理工學院 教師
2016.11--2017.12 佛羅里達州立大學 博士后

(1) Kewei Wang, Baisheng Ma, Tao Li, Chunxiao Xie, Zhenzhong Sun, Dianguang Liu, Jinling Liu, and Linan An. “Fabrication of high-entropy perovskite oxide by reactive flash sintering” Ceramics International, 2020, 46(11): 18358-18361
(2) Kewei Wang, Baisheng Ma, Ligong Zhang, Zhenzhong Sun, and Yiguang Wang. “Electron Transport Behavior of Polymer-derived Amorphous Silicoboron Carbonitrides” Journal of the American Ceramic Society, 102(10): 6038-6047, 2019  
(3) Kewei Wang, Xuqin Li, Baisheng Ma, Min Zhang, Jinling Liu, Yiguang Wang, Ligong Zhang, and Linan An. “Evolution in the Electronic Structure of Polymer-Derived Amorphous Silicon Carbide,” Journal of the American Ceramic Society, 98, 2153-2158, 2015
(4) Kewei Wang, Lei Luo, Yonghong Lu, Juan Yang, Yiguang Wang. “In-field Reparation of the damaged coatings for C/C composites,” Ceramics International, 41, 7549-7555, 2015
(5) Kewei Wang, Baisheng Ma, Xuqin Li, Yiguang Wang, and Linan An. “Structural Evolutions in Polymer-Derived Carbon-Rich Amorphous Silicon Carbide.” Journal of Physical Chemistry A, 119, 552-558, 2014
(6) Kewei Wang, Xuqin Li, Basheng Ma, Yiguang Wang, Ligong Zhang, and Linan An. “On Electronic Structure of Polymer-Derived Amorphous Silicon Carbide Ceramics,” Applied Physics Letters, 104, 221902, 2014
(7) Kewei Wang, Basheng Ma, Xuqin Li, Yiguang Wang, and Linan An. “Effect of Pyrolysis Temperature on the Structure and Conduction of Polymer-Derived SiC,” Journal of the American Ceramic Society, 97, 2135-8, 2014
(8) Kewei Wang, Basheng M, Yiguang Wang, and Linan An. “Complex Impedance Spectra of Polymer-Derived Silicon Oxycarbides,” Journal of the American Ceramic Society, 96, 1363-5, 2013

東莞理工學院機械工程學院：趙愈亮

2018.07-- 東莞理工學院 教師

1. Y.L. Zhao, W.W. Zhang, B. Koe, W.J. Du, M.M. Wang, W.L. Wang, E. Boller, A. Rack, Z.Z. Sun, D. Shu, B.D. Sun, J.W. Mi, Multiscale characterization of the nucleation and 3D structure of Al3Sc phases using electron microscopy and synchrotron X-ray tomography, Materials Characterization, 2020, 164, 110353. (中科院SCI一區, IF: 3.562)
2. Y.L. Zhao, Z. Wang, C. Zhang, W.W. Zhang, Synchrotron X-ray tomography investigation of 3D morphologies of intermetallic phases and pores and their effect on the mechanical properties of cast Al-Cu alloys, Journal of Alloys and Compounds, 2019, 777: 1054-1065. (中科院SCI二區, IF: 3.799)
3. Y.L. Zhao, D.F. Song, B. Lin, C. Zhang, D.H. Zheng, S. Inguva, T. Li, Z.Z. Sun, Z. Wang, W.W. Zhang, 3D characterization of ultrasonic melt processing on the microstructural refinement of Al-Cu alloys using synchrotron X-ray tomography, Materials Characterization, 2019, 153: 354-365. (中科院SCI二區, IF: 3.22)
4.Y.L. Zhao, D.F. Song, B. Lin, C. Zhang, D.H. Zheng, S. Inguva, T. Li, Z.Z. Sun, Z. Wang, W.W. Zhang, 3D characterization of ultrasonic melt processing on the microstructural refinement of Al-Cu alloys using synchrotron X-ray tomography, Materials Characterization, 2019, 153: 354-365. (中科院SCI二區, IF: 3.22)
5.Y.L. Zhao, W. Du, B. Koe, T. Connolley, S. Irvine, P. K. Allan, C. M. Schlepütz, W. Zhang, F. Wang, D.G. Eskin and J. Mi, 3D Characterisation of the Fe-rich intermetallic phases in recycled alloys by synchrotron X-ray microtomography and skeletonisation, Scripta Materialia, 2018, 146, 321-326. (中科院SCI一區, IF: 3.747)
6. Y.L. Zhao, W.W Zhang, C. Yang, D.T. Zhang, Z. Wang, Effect of Si on Fe-rich intermetallic formation and mechanical properties of heat-treated Al-Cu-Mn alloys, Journal of Materials research. 2018, 33 (8): 898-911. (中科院SCI三區, IF: 1.673)
7. Y.L. Zhao, W.W. Zhang, F.S. Meng, Z. Wang, D.T. Zhang and C. Yang, Microstructure and mechanical properties of Al-5.0Cu -0.6Mn-0.6Fe alloy produced by ultrasonic vibration and applied pressure, Rare Metal Materials and Engineering, 2018, 47 (2): 457-462. (中科院SCI四區, IF: 0.258)
8. W.W. Zhang, Y.L. Zhao, D.T. Zhang, Z.Q. Luo, C. Yang and Y.Y. Li, The effect of Si addition on the microstructure and tensile properties of casting Al-5.0Cu-0.6Mn-1.2Fe alloys, Transactions of Nonferrous Metals Society of China, 2018, 28:1061-1072. (中科院SCI四區, IF: 1.342)
9. Y.L. Zhao, Z.X. Zhu, Y, Xie and F.C. Yin, Phase equilibria of Ni-Sb-Zn Ternary system at 600 °C, International Journal of Materials Research, 2016, 107, 894-902. (中科院SCI四區, IF: 0.681)
10. Y.L. Zhao, Z.X. Zhu, F.C. Yin, Z.H. Long, and Y. Wu, 450 °C isothermal Section of the Ni-Sb-Zn Ternary System at the Zn-Rich Corner, Journal of Phase Equilibria and Diffusion, 2014, 35, 186-194. (中科院SCI四區, IF: 0.938)
11. Z.X. Zhu, Y.L. Zhao, M.X. Zhao, F.C. Yin, Z. Li, and Y.X. Liu, The Zn-Rich Corner of the Zn-Fe-Al-Sb Quaternary System at 450 °C, Journal of Phase Equilibria and Diffusion, 2013, 34, 474-483. (中科院SCI四區, IF: 0.938)
12. Y.L. Zhao, Y. Zhang, Z. Luo, Z. Wang and W.W. Zhang, Effect of ultrasonic vibration and applied pressure on the microstructure and mechanical property of Al-5.0Cu-0.6Mn-0.6Fe alloys, Materials Science Forum, 2016, 850: 559-565. (EI)
13. 趙愈亮，孟凡生，張 楊，張大童，楊 超，張衛文, Si 對擠壓鑄Al-5.0Cu-0.6Mn-0.7Fe 合金顯微組織和力學性能的影響, 中國有色金屬學報, 2015, 25, 3040-3050. (EI)
14. Y.L. Zhao, W. Du, B. Koe, T. Connolley, S. Irvine, P. K. Allan, C. M. Schlepütz, W. Zhang, F. Wang, D.G. Eskin and J. Mi, Synchrotron X-ray tomography studies of Fe-rich intermetallic phases in Al alloys, 6th Decennial International Conference on Solidification Processing, 25th-28th July 2017, Old Windsor, UK

東莞理工學院機械工程學院：徐進

2018.06-- 東莞理工學院 教師

1. Jin Xu et al, Efficient, stable and high color rendering index white polymer light-emitting diodes by restraining the electron trapping, Org. Electron., 2020, 84, 105785.(中科院SCI二區，IF 3.31)
2. Yuhao Zhang, Jin Xu* et al, Highly efficient blue light-emitting polymers containing N-(2-decyltetradecyl) carbazole [2,3-b] benzo[d]thiophene-S, S-dioxide moiety, Org. Electron., 2020, 81, 105670.(中科院SCI二區，IF 3.31)
3. Jin Xu et al, Efficient tandem polymer light-emitting diodes with PTPA-P/ZnO as the charge generation layer, J. Mater. Chem. C, 2019, 7, 8003-8010.(中科院SCI一區，IF 7.059)
4. Jin Xu et al, Near-infrared polymer light-emitting diodes based on a inverted device structure, J. Mater. Chem. C, 2019, 7,12114-12120.(中科院SCI一區，IF 7.059)
5. Feng Peng#, Jin Xu# et al, Ether-soluble hole-transporting polymers based on triphenylamine/phenothiazine moieties with shallow HOMO levels, Polym. Chem., 2019, 10, 1367-1376.(中科院SCI一區，IF 5.342)
6. Jin Xu et al, Challenging conventional wisdom: finding high-performance electrodes for light-emitting electrochemical cells, ACS Appl. Mater. Interfaces, 2018, 10, 33380−33389.(中科院SCI一區，IF 8.758)
7. Jin Xu et al, Blue light-emitting polymers containing ortho-linking carbazole-based benzothiophene-S, S-dioxide derivative, Dyes and Pigments, 2017, 138,245-254.(中科院SCI一區，IF 4.613)
8. Jin Xu et al, Highly efficient inverted blue light-emitting diodes by thermal annealing and interfacial modification, Org. Electron, 2017, 49, 1-8.(中科院SCI二區，IF 3.31)
9. Jin Xu et al, Color tuning in inverted blue light-emitting diodes based on a polyfluorene derivative by adjusting the thickness of the light-emitting layer, J. Mater. Chem. C, 2015, 3, 9819-9826.(中科院SCI一區，IF 7.059)

東莞理工學院機械工程學院：宋菊青

2016.10-- 東莞理工學院 教師

1. Juqing Song, Huichang Gao, Guanglin Zhu, Xiaodong Cao, Xuetao Shi* and Yingjun Wang*. The preparation and characterization of polycaprolactone/graphene oxide biocomposite nanofiber scaffolds and their application for directing cell behaviors, Carbon, 2015, 95(2015): 1039-1050. (中科院SCI一區，IF 8.821)
2. Juqing Song, Huichang Gao, Guanglin Zhu, Xiaodong Cao, Xuetao Shi* and Yingjun Wang*. The construction of three-dimensional composite fibrous macrostructures with nanotextures for biomedical applications, Biofabrication, 2016, 8(3): 035009. (中科院SCI一區，IF 8.213)
3. Juqing Song#, Guanglin Zhu#, Lin Wang, Geng An, Xuetao Shi* and Yingjun Wang*. Assembling of electrospun meshes into three-dimensional porous scaffolds for bone repair, Biofabrication, 2017, 9(1): 015018. (中科院SCI一區，IF 8.213)
4. Nanying Li#, Juqing Song#, Xiaoyu Li, Xuetao Shi* and Yingjun Wang*. Periosteum Tissue Engineering——A review, Biomaterials Science, 2016, 4(11): 1554-1561. (中科院SCI二區，IF 6.183)
5. Juqing Song#, Guanglin Zhu#, Huichang Gao, Lin Wang, Nanying Li, Xuetao Shi* and Yingjun Wang*. Origami meets electrospinning: a new strategy for 3D nanofiber scaffolds, Bio-Design and Manufacturing, 2018, 1(4): 254-264. (IF 4.095)
6. Yingjun Wang, Guanglin Zhu, Nanying Li, Juqing Song, Lin Wang and Xuetao Shi*. Small molecules and their controlled release that induce the osteogenic/chondrogenic commitment of stem cells, Biotechnology Advances, 2015, 33(8): 1626-1640. (中科院SCI一區，IF 10.744)
7. Nanying Li, Juqing Song, Guanglin Zhu, Xuetao Shi* and Yingjun Wang*. Alendronate conjugated nanoparticles for calcification targeting, Colloids and Surfaces B: Biointerfaces, 2016, 142(2016): 344-350. (中科院SCI二區，IF 4.389)
8. 宋菊青, 丁鵬, 陳盛貴, 董曉明. 一種家用娛樂裝置. 中國專利（已授權）, 專利號：ZL201821912802.X.
9. 宋菊青, 丁鵬, 陳盛貴, 黃俊逸. 一種DLP-3D打印機, 中國專利（已授權）, ZL201821912771.8.
10. 陳盛貴, 宋菊青, 盧秉恒. 一種可直接觸碰到產品的3D打印機. 中國專利（已授權）, ZL 201721430364.9.
11. 李楠, 宋菊青, 陳盛貴, 盧秉恒. 一種帶活動成型臺的3D打印設備. 中國專利（已授權），專利號：ZL 201721430597.9.

東莞理工學院機械工程學院：趙成亮

辦公室電話  Office Phone：
E-mail： zhaocl@dgut.edu.cn

教育背景/經歷　Education
2015.09-2018.06 中國科學院大學 博士生

2009.09-2012.07 中國科學院研究生院 碩士生

2005.09-2009.07 中國地質大學 本科生

工作經歷　Work Experience
2018.06-- 東莞理工學院  講師

2012.09-2015.07 中國科學院寧波材料技術與工程研究所 工程師

科研情況　Scientific
長期從事鐵基、鈷基非晶/納米晶軟磁材料的開發與應用技術研究

1. 2019國家自然科學基金青年項目：鐵基非晶合金的取向納米晶化及其力學和磁性能研究，主持

2. 2019年廣東省重大科技專項資金項目: 新一代非晶合金的設計、制備與先進制造基礎研究，參與

出版物　Publications
1. Chengliang Zhao, Anding Wang, Shiqiang Yue, et. al, Significant improvement of soft magnetic properties for Fe(Co)BPSiC amorphous alloys by magnetic field annealing, Journal of Alloys and Compounds, 742 (2018) 220-225.

2. Chengliang Zhao, Anding Wang, Shiqiang Yue, et. al, Correlation between soft-magnetic properties and Tx1-Tc in high Bs FeCoSiBPC amorphous alloys, Journal of Alloys and Compounds, 659 (2016) 193-197.

3. Chengliang Zhao, Chaochao Dun, Qikui Man, et. al, Enhancement of plastic deformation in FeCoNbB bulk metallic glass with superhigh strength, Intermetallics, 32 (2013) 408-412.

1. 趙成亮，常春濤，門賀等，一種含磷和碳的母合金的熔煉工藝，發明，已授權CN201510318733.4

2. 趙成亮，常春濤，門賀等，塞尺帶用非晶合金帶材及制備方法，發明，已授權CN201410275727.0

3. 常春濤，王安定，趙成亮等，具有高飽和磁感應強度和強非晶形成能力的鐵基非晶合金，發明，已授權CN201410285976.8

東莞理工學院機械工程學院：武靜

2017.06-- 東莞理工學院 專任教師
2017.06-2017.09 澳大利亞科廷大學 訪問學者
[1]. Jing Wu, Yu Wang, Weiwei Zhang, Zhenhua Nie, Rong Lin, Hongwei Ma. Defect detection of pipes using Lyapunov dimension of Duffing oscillator based on ultrasonic guided waves [J]. Mechanical Systems and Signal Processing, 2017, 82(1): 130-147. (中科院SCI二區，IF：6.471)
[2]. Jing Wu, Hong Hao, Jun Li, Yan Wang, Fei Yang, Hongwei Ma. Defect Detection in Pipe Structures using Stochastic Resonance of Duffing Oscillator and Ultrasonic Guided Waves. International Journal of Pressure Vessels and Piping.2020.187  (中科院SCI四區，IF：2.23)
[3] Weiwei Zhang, Hong Hao, Jing Wu, Jun Li, Hongwei Ma,Chen Li. Detection of Minor Damage in Structures with Guided Wave Signals and Nonlinear Oscillator [J]. Measurement. 2016. 06.033(SCI) (中科院SCI四區，IF: 3.364)
[4].武靜, 張偉偉，聶振華, 馬宏偉, 楊飛. 基于Lyapunov指數的管道超聲導波小缺陷定位實驗研究[J]. 振動與沖擊, 2016, 35(1): 40-53. (EI)
[5].Jing Wu, Yu Wang, Weiwei Zhang, Hongwei Ma .The influence of white Gaussian noise on Duffing system[C]. 24th Australasian Conference on the Mechanics of Structures and Materials, Perth, Australia, 2016.12.6-2016.12.9. (EI)
[6].武靜, 張偉偉, 馬宏偉. 利用Lyapunov指數實現超聲導波檢測的實驗研究[J].振動與沖擊, 2014.33(24):82-87. (EI)
[7] 馬宏偉；武靜；張偉偉；莫應強；張喆斯；林榮.基于杜芬方程Lyapunov指數的超聲導波檢測方法. （授權號：ZL201310195803.2）授權時間：2016.3.9
[8] 馬宏偉；武靜；張偉偉；楊飛. 基于分數維的管道超聲導波小缺陷識別與定位方法.
（授權號：ZL201510145418.6）授權時間：2017.7.4
[9] 武靜；馬宏偉；溫宇立；張偉偉.基于Duffing系統的隨機共振特性的超聲導波檢測方法.（授權號：ZL 201710407047.3） 授權時間：2019.10.08
[10] 馬宏偉；武靜；溫宇立；張偉偉. 基于雙穩態系統的超聲導波信號檢測方法.
（授權號：ZL 201710407036.5）授權時間：2019.6.28

東莞理工學院機械工程學院：王皓亮

2018-- 東莞理工學院 教師


在《Acta Materialia》、《Scripta Materialia》、《Journal of Alloys & Compounds》和《Materials Science and Engineering A》等期刊發表學術論文多篇

東莞理工學院機械工程學院：申芳華

添加東莞理工學院學姐微信，或微信搜索公眾號“考研派小站”，關注【考研派小站】微信公眾號，在考研派小站微信號輸入【東莞理工學院考研分數線、東莞理工學院報錄比、東莞理工學院考研群、東莞理工學院學姐微信、東莞理工學院考研真題、東莞理工學院專業目錄、東莞理工學院排名、東莞理工學院保研、東莞理工學院公眾號、東莞理工學院研究生招生）】即可在手機上查看相對應東莞理工學院考研信息或資源。